Are You Embarrassed By Your BEST ROOFING COMPANIES Skills? Here’s What To Do

The best flat roof roofing material is undoubtedly an individual sheet of rubber custom made for weather-proofing flat roofs, such as Firestone’s EPDM product.

That is laid directly onto roof boarding, itself supported by the roof rafters and nagging. Insulating material is generally laid in the space between your two, and if you are renewing your flat roof anyway you may as well take the chance of renewing that simultaneously.

This will almost certainly function as recommendation you obtain from any reputable builder or roofer advising you on replacing your existing flat roof.

Until recently the most popular material for a new flat roof was bituminous felt laid in three layers, the initial layer nailed down and the upper two bonded to the main one beneath with mastic bitumen. Based on the material used, this may mean heating a good bitumen-based compound to create it liquid, and pouring it onto the underlying felt and spreading it evenly on the whole area of the roof.

Then Roof cleaning near me had to hold back for the compound to cool before applying the next layer, and by the end spreading a layer of stone chippings on the roof and bonding it with a chipping compound, this being to reflect the sun’s rays and prevent the felt and bitumen degrading quickly.

This was altogether a fairly messy, complicated and time-consuming job best left to the experts. In addition, there were several stages where it had been very easy to fail to make the roof weather-proof, e.g. where the edge of the felt met the existing tile or slate roofing of the pitch roof.

On top of that, if, or rather when, there developed a leak in the flat roof, it might be very difficult and messy to learn wherever the rain was getting back in. Seldom would the manifestation of the leak on the ceiling of the area below be directly below the foundation of it. Water could get by way of a weakness in the bitumen felt and travel along a rafter before descending to the ceiling board below.

The brand new generation of rubber-based flat roofing systems are far superior. In case you have reasonable DIY abilities then you can certainly probably do-it-yourself, with one other person to aid. You can easily look for a local supplier of rubber flat roof roofing material online, and the existing price is only around �6.65 per square metre.

Most suppliers cut the material to the exact size and shape that you require so there are no unnecessary joins, meaning no weaknesses and an extremely long-lasting, leak-proof roof.

The vital area of the whole process is to ensure that there are no gaps between the rubber roof and any existing pitch roof where rain may penetrate. To ensure you can find no problems it’s important to run the rubber material up and under the tiles or slates of the adjoining pitch roof in order that any rain dripping from the lower-most row falls onto the rubber, with no possibility of it over-lapping the edge and getting underneath the pitch roof.

Also, make sure that the existing slope of the flat roof towards the guttering or other method of water escape is maintained. The rubber is merely glued onto the roof boards and sealed where appropriate with metal brackets or bitumen so that rain penetration is impossible. Mind that the glue covers the entire underneath of the rubber to be able to avoid bumps in the top that could obstruct the drainage of the water away.

Rubber roofs have been proven to last for well over 50 years under all weathers, so it really is the only real flat roof roofing material that you should consider when deciding on a fresh flat roof.

Leave a Reply

Your email address will not be published. Required fields are marked *